How To Dissolve Plastic In Toilet Bowl
There are varieties of things that fall into the commode in day-to-day life while using the toilet and during any cleaning works and trying to clean those unwanted things by flushing them down unknowingly. Sometimes, it happens by mistake too.
But you have to understand that everything should not flush in the toilet because those things cannot pass through the drainage pipe set with the commode, including any plastic parts. If those things fall into the commode by chance or by mistake, you should read and follow the methods mentioned here to get rid of unwanted situations in your toilet.
There are a variety of ways to solve the problems. In this article, we’ll describe some of the most common ways that people dissolve Plastic from their toilet bowl and give you tips and tricks on how to get the job done quickly and easily.
Methods on How To Dissolve Plastic In Toilet Bowl
There is no one solution that fits all answers to this question, as the best way to dissolve Plastic in a toilet bowl without chemicals will vary depending on the type of Plastic and the condition of the bowl.
I am describing a few methods here step-by-step, sorted from basic to professional. So, apply the methods consistently until your problem is solved.
1. Use a Big Bucket Full of Water
When the Plastic gets stuck in the drainage pipe of your toilet bowl, it goes unclogged due to high water flow. So, as a basic step, you should follow that by filling a bucket with water and pouring it into the commode.
More water will flow through the drain line pipes than the normal flush we do. This idea can help get rid of your stuck Plastic from the toilet bowl.
2. Create Pressure with a Plunger
The plunger can be a great weapon to solve your problem. So, retrieve your hidden plunger and use it in the process of normalization. Try it 5-6 times, and this way, the clogged Plastic can also be dissolved. If this process does not work, apply the next step.
3. Using Boiling Water
Boiling Water is a common and popular method for dissolving or clogging anything. Hot water will melt, squeeze or soften the Plastic, and there will be more space in the drainage pipe, so this process is also effective to free your drain pipe.
Process:
- Let the water heat up to a boiling pot in a large pot,
- Turn off the toilet bowl water lines,
- Drain water from your toilet bowl as much as possible.
- Now pour hot water into the toilet bowl and wait for 1 minute approx.
- Then, turn on the water lines and flush using the plunger.
If you follow this method, most of the Plastic in your toilet bowl will pass through the drainage pipe.
4. Toilet Auger
Toilet Auger is known as a plumber’s snake. It plays a very effective role in recovering any clogged things in the toilet bowl. This tool works in a very simple way.
First, the tube of the toilet auger has to be inserted into the toilet bowl, and the handle has to be turned and pushed. When the plastic comes in contact with the toilet auger, the stuck Plastic will be forced to be removed. (Be sure to wear gloves for safety when using it).
Usually, clog problems are solved by using this method but if not or the clogs are stronger, then go for the next.
5. Use Squirt Gun Toilet Drainer
It works much like a plunger but creates more force than a plunger.
There are two types of Squirt Gun Toilet Drainer, and I am mentioning the rules for using both below:
Pump & Press Trigger:
Attach the size of your toilet drain to this Squirt Gun Toilet Drainer. Now pump the Squirt Gun Toilet Drainer and then press the trigger to fit well with the toilet drainage. Right!
Manual Push:
This type of Squirt Gun Toilet Drainer fits well with the toilet drainage, and you need to push the handle carefully, as shown in the instruction manual.
You can try this product, and hopefully, you will get effective results right away.
N.B.: Every method of this blog is effective depending on the nature of the clog that is stuck in the drainage pipe and also cheaply as well.
Why Don’t Use Chemicals to Dissolve Plastic in the Toilet Bowl?
Most of the time, Chemical cleaners are bad for your pipes because the materials of the chemical can cause a chemical reaction, which generates heat and can melt or deform the pipe. On the other hand, in the case of plastic pipes, it is a little effective for this purpose too.
Why Don’t Use Drano or Liquid Plumber?
Drano or Liquid Plumber is a drain opener that works well in most clogged drain pipes, and it causes problems along with time. It is not biodegradable and can cause corrosion to the pipes if left for a long time.
Drano contains sodium hydroxide, which dissolves plastics and driveway sealant residue. Toilet bowls may crack, PVC pipes may melt, and pipe glue might be eaten by Drano or Liquid Plumber. For this reason, the plumbers also hate Drano or liquid plumbers.
FAQ’s
Is Liquid Plumber Safe for Pipes?
Yes, liquid plumbers are safe for pipes. However, always use caution when using a tool like a snake or a plunger; these can cause damage to your pipes if used incorrectly.
Does Vinegar & Baking Soda Work Dissolve Plastic in Toilet Bowl?
Although Vinegar & Baking Soda works for unclogging normal toilets, they are not useful for dissolving Plastic because Vinegar & Baking Soda cannot create any reaction that helps for the purpose.
Conclusion
Now that you know how to dissolve Plastic in the toilet bowl. But If you cannot do this on your own, it is advisable to call a professional plumber. Plumbers are specially trained in this field and will be able to dissolve the Plastic quickly and without any trouble. So, if you’re ever faced with this predicament, don’t hesitate to reach out to them!
Do you have a question? If so, leave a comment below, and one of our Bloggers will get back to you as soon as possible.
