How to Make a Water Trough Bathtub

Making a Bathtub From a Trough tub is beneficial to have in your house. It makes bathing more accessible, and you can use it for other purposes. There are several kinds of bathtubs available, but the best ones are made from steel.

You should choose one with a nice finish, durable and easy to clean. This will give you value for money and make your bath time more enjoyable.

Outside Water Through Bathtub on Deck

Step-by-step Guide on How to Make a Water Trough Bathtub

If you want to build a water trough bathtub, then here is the step-by-step guide for you. If you are looking for information on creating a water trough bathtub at home, read this article for more details.

Step – 1: Collect Steel Stock Tank

First, you need to manage a stock tank. You can easily find it on e-commerce sites or hardware stores. It would be best if you collected the stock tank according to the size of your choice.

When it comes to the dimensions of a stock tank, you should choose one that’s bigger than what you need but not too big. It would be best if you also were sure to consider the height and width of your chosen tank. After collecting the stock tank, you should clean it.

Step – 2: Create Hole Under the Tank

Now, you need to create a hole under the stock tank. This hole will be used as the water trough. You can do this by drilling a small hole or by using a 2-inch round hole saw drill machine. 

Once you’ve drilled the hole. Another thing to keep in mind is that the drainage hole in the bathtub should be along the hole in the bathtub.

Step – 3: Make Sure Brushed Nickel Lift Adjustable

Now that the hole is created, you need to make sure your brushed nickel lift is adjustable to fit through easily.

I noticed that it was not adjusting as I was correcting. Because the cutting area is elevated, I will take around a stone or an oval-shaped hammer to flatten it, wrap it in cloth, and then hit it in the hole until it comes to the desired shape. Be sure that it is a little lower around the corners of the hole.

Step – 4: Ready a Place for Water Trough Bathtub

The place where you want to place your water trough bathtub needs to be prepared first. Remove everything in that place and make sure that space is parallel. (If space is not even, you can use a wooden deck, which will help to keep the bathtub leveled.)

Step – 5: Attached Brushed Nickel Lift 

You can put glue or gum paste around a brushed nickel lift to set it in the hole in the tank. Because glue or fun paste will prevent water leakage from around it, stick it to the hole after applying the glue and tighten it at the suitable stage.

Remember, A brushed nickel lift can be loose if held in place by hand, so use the necessary tools to tighten.

Step – 6: Check Water Trough Bathtub Level

You need to check the water level tools to see if the water tank is placed correctly. If the tank does not sit at level, you can use some support underneath the tank.

Otherwise, if the place is uneven and cannot be fixed with any support, you can make a wooden deck with the help of a carpenter. Then you can place the bathtub properly on the deck.

Step – 7: Check the Leakage

After carefully monitoring the water level, the tank should be left overnight to fill up with water. If the water is low, it should be understood that the brushed nickel lift is not set correctly, or there is leakage in your stock tank.

Pros & Cons About Water Trough Bathtub

Pros:

  • Water Trough tub can use it in a variety of ways
  • Being a light, you can move very easily
  • It can be made at a low cost
  • If you want, you can customize it in different ways
  • It is suitable for any environment
  • No extra space is required
  • It can be used just like a regular bathtub

Cons:

  • It May not fit all spaces
  • Since it is like a large steel bowl in general, it needs to be customized as required for use.
  • If the quality of steel is bad, there is a possibility of rust. 

Frequently Asked Questions

Where Can I Buy the Materials to Build a Water Trough Bathtub?

You can buy a water trough bathtub kit at most home improvement stores. Generally, stock tanks (6-8 feet) cost between 400$ to 500$. But if you need a bigger stock tank, the cost will be higher. And for a quality Brushed Nickel Lift, you have to spend 10$ to 25$.

Are Galvanized Tubs Safe for Bathing?

Although it is widely believed that galvanized bathtubs can be harmful to humans for many reasons, galvanized bathtubs do not have a detrimental effect on bathing.

Are the Japanese Soaking Tubs & Water Trough the Bathtub the Same?

Many people think that the Japanese tab and the bathtub are the same. But this is not correct. Both bathtubs are different. As a whole, there are several types of bathtubs found worldwide.

Especially, its type becomes familiar nationwide. But most of the time in the modern age, people seek a standard one considering its built quality, materials, fittings, and sizes.

Which place is the Best for Building Water Trough the Bathtub?

You can place it in any place in the bathtub. But keep in mind that it can be placed a little away from the toilet seat. Maybe the smell of the toilet can disrupt the fun of the bath. If you don’t think this is a problem, you can set your bathtub to your liking. 

Note: If your drain hole is in a fixed place, then you have to place it along that hole.

Conclusion

We hope you have got a total idea or solution on how to build a water trough bathtub for your house to enjoy and feel comforted.

You can use the comment section below to share your opinion on this blog post. Also, feel free to ask any questions you may have regarding this topic; please share it with your friends and family!

You may read also – How to Build an Outhouse With a Flushing Toilet

Similar Posts

Leave a Reply

Your email address will not be published.